Measurement-computing CIO-PDISO8 Manuale Utente Scaricare il pdf (Pagina 13)

CIO-PDISO8 User's Guide Installing the CIO-PDISO8

Cabling

The red stripe

identifies pin # 1

Figure 6. C37FF-x cable

Figure 7. C37FFS-x cable

Field wiring and signal termination accessories

You can connect the CIO-PDISO8 to the following accessory boards using the C37FF-x cable.

 CIO-MINI37 – 37-pin screw terminal board.

 SCB-37 – 37-conductor, shielded signal connection/screw terminal box.

Details on these products are available on our web site at www.mccdaq.com/products/screw_terminal_bnc.aspx.

Caution! Do not use exposed-screw terminal boards if your field voltage is more than 24 volts. Using a

screw terminal board with high voltage inputs or outputs exposes you and others to those high

voltage signals. Construct a safe cable to carry your signals directly from your equipment to the

CIO-PDISO8 connector.

For additional information about digital interfacing

Detailed information regarding digital interfacing is contained in MCC's Guide to Signal Connections. This

document is available on our web site at www.mccdaq.com/signals/signals.pdf.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19

Nessun commento

Measurement-computing CIO-PDISO8 Manuale Utente Pagina 13