Measurement-computing WaveView Manuale Utente Pagina 19
- Pagina / 48
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
WaveView
03-05-02
WaveView, pg. 17
The remaining columns apply only to the WBK17 module.
Reference Note:
Refer to the WBK17 Document Module (in the WBK Option Cards and Modules User’s Manual,
p/n 489-0902) for detailed information regarding the various modes. The WBK17 document
module includes explanations, block diagrams, and examples.
WaveView Configuration Window Showing WBK17-Dedicated Columns
Counter Mode
–
Applies to WBK17 Only
.
WaveView supports several counter modes and can receive input
from up to two encoders (in 1X, 2X, or 4X modes).
All WBK17 modes are detailed in the WBK17 Document Module.
Note
:
The Encoder Mode can only be selected on WBK17
channels x-1 and x-5. Inputs “B” and “Z” must be
connected to the next consecutive channels.
Counter Mode Pull-Down List
Reference Note:
Refer to the WBK17 Document Module (in the WBK
Option Cards and Modules User’s Manual,
p/n 489-0902) for additional information regarding the
following counter modes.
•
Counter
The counter makes use of a 16-bit counter (Counter Low), or a 32-bit counter (Counter High). While
in this mode, the channel’s input increments the counter. The counter is cleared at the beginning of
each scan, and the value [just prior to clearing] is latched and returned to the WaveBook/516, /512A,
or WaveBook/516A. See the upcoming Programmer Note.
•
Totalize
The totalize mode makes use of a 16-bit counter (Counter Low), or a 32-bit counter (Counter High).
While in this mode, the channel’s input increments the counter and rolls it over, resulting in a
cumulative total for the counter value. (see the following Programmer Note)
Programmer Note:
In regard to programming, the “Counter Mode” involves selecting the “Clear on Read” option
within a single “Counter/Totalize Mode;” and the “Totalize Mode” involves selecting the
“Totalize” option. In WaveView, the Counter and Totalize modes are treated as two distinct
modes.
Note that the “
Clear on Read
” mode is not available when using an external clock.
Refer to the WBK17 Document Module (in the WBK Option Cards and Modules User’s Manual,
p/n 489-0902) for additional information.
T
hese 7 columns apply only to WBK17 modules.
D
etailed information regarding operational aspects
i
s provided in the WBK17 document module.
- WaveView 1
- # Item Description 4
- Startup WaveView 5
- Configure Channels 7
- Configure Acquisition 8
- Collect and View Data 8
- Store Data 9
- Toolbar Buttons 10
- Pull-Down Menu Commands 10
- 03-05-02 11
- Performance Tab Selected 13
- Memory Module Tab Selected 13
- “WBK17” Tab 14
- Input Channel Configuration 14
- This means: 17
- Simplifying gives you: 17
- HPF Cutoff – 18
- Source Level – 18
- Bridge Type – 18
- Invert – 18
- Counter Mode 19
- Edge Level 21
- Edge Type 22
- Debounce Time 22
- Debounce Edge Detection 22
- Tick Duration 22
- Timing Intervals 23
- Acquisition Configuration 24
- Immediate 25
- Channel 1 Analog 25
- Multiple Ch Analog 25
- Digital-Pattern Trigger 27
- Pulse Trigger 28
- WaveView Scope Window 29
- Bar Graph Meters 34
- Analog Meters 35
- Digital Meters 36
- Meter Toolbars 37
- Meter Pull-Down Menus 37
- Meters Configuration Menu 38
- Configuring a Meter 38
- WaveView, pg. 37 39
- Overview 41
- Performing System Calibration 42
- Calibrate 43
- [button] 43
- A Calibration Example 44
- WaveCal, pg. 5 45
- WaveCal, pg. 6 46
- WaveCal, pg. 7 47
- WaveCal, pg. 8 48
Prodotti e manuali riguardandi Hardware Measurement-computing WaveView
(146 pagine)Nokia Nokia Asha 306 manuels
Manuels d'utilisation et guides de l'utilisateur pour Téléphones mobiles Nokia Nokia Asha 306.
Nous fournissons des manuels en pdf 1 Nokia Nokia Asha 306 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commenti su questo manuale