Measurement-computing DBK210 Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Measurement-computing DBK210. Measurement Computing DBK210 User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 10
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
DBK210 32 Channel Digital I/O Carrier Board
for Grayhill
TM
70M-Series Mini-Modules
Overview …… 1
Warnings, Cautions, and Tips …… 4
Power …… 5
External Power Watchdog …… 5
Setting Module Banks to Input or Output …… 5
Setting the Local Address …… 6
Software Setup …… 7
Specifications …… 10
Note:
The DBK210 provides: (a) two P2 connectors, (b) one P1 connector, (c) footprints for 32 optically-
isolated Grayhill 70M-Series mini-modules, (d) a 100-pin P4 connector for use with DaqBook/2000
Series Devices and DaqBoard/2000 Series Boards, and (e) 4 removable screw terminal blocks. Each
block supports 8 mini-modules.
This product is not used with:
LogBook
DaqBook/100 Series devices
DaqBoard/100 (ISA-type) Series devices
Reference Notes:
Refer to the DBK Basics section of this manual in regard to calculating system power
requirements.
Chapter 2, System Connections and Pinouts, includes pinouts for P1, P2, P3, and P4
connectors.
Refer to the pinouts that are applicable to your system, as needed.
For a quick comparison of all DBK200 Series boards, refer to the DBK200 Series Matrix.
The matrix is located just before the DBK200 section of this manual.
Refer to the DaqBoard/2000 Series and cPCI DaqBoard/2000c Series User’s Manual
(p/n 1033-0901) or the DaqBook/2000 Series User’s Manual (p/n 1103-0901) for information
pertaining to those products, as needed.
Overview
DBK210 Carrier Board for Grayhill 70M-Series Mini-Modules
The information included in this section, when combined with that found in related DBK sections, should
enable you to set up your desired configuration.
It is important to note that the DaqBoard/2000 Series boards communicate [external from the host PC]
through a 100-pin P4 connector. The P1, P2, and P3 connectors discussed in association with these boards
are subset connectors of the 100-pin P4 connector. DaqBook/2000 Series devices have both a P4
connector and a set of P1, P2, and P3 connectors on the unit. The System Connections and Pinouts chapter
includes pinouts for both types of devices, i.e., DaqBoards and DaqBooks.
DBK Option Cards and Modules 987594 DBK210, pg. 1
Vedere la pagina 0
1 2 3 4 5 6 7 8 9 10

Sommario

Pagina 1 - Overview

DBK210 32 Channel Digital I/O Carrier Board for GrayhillTM 70M-Series Mini-Modules Overview …… 1 Warnings, Cautions, and Tips …… 4 Power …… 5 Externa

Pagina 2 - WARNING

DBK210, pg. 10 987594 DBK Option Cards and Modules DBK210 – Specifications Name/Function: Carrier Board for GrayhillTM 70M-Series Mini-Modu

Pagina 3 - 987594 DBK210, pg. 3

DBK210, pg. 2 987594 DBK Option Cards and Modules DBK210 is a four-bank carrier board for optically-isolated Grayhill 70M-Series mini-module

Pagina 4 - Warnings, Cautions, and Tips

DBK210 boards are typically installed in NEMA-type panels; however, they can be installed on DIN rails. Separate mounting instructions are included w

Pagina 5 - 987594 DBK210, pg. 5

DBK210, pg. 4 987594 DBK Option Cards and Modules Warnings, Cautions, and Tips WARNING Ensure that hard-wire emergency over-ride circuitry

Pagina 6 - DBK210, pg. 6

Power The DBK210 requires an external isolated 5 volt DC power supply with at least 0.600 amp current capacity. External power attaches to the DBK210

Pagina 7 - Software Setup

DBK210, pg. 6 987594 DBK Option Cards and Modules Setting the Local Address Set via S1, Swi

Pagina 8 - DBK210, pg. 8

Software Setup Note: DBK210 is not applicable to LogBook or LogView. To use DBK210 from within DaqView, you must first configure the DaqView softwar

Pagina 9 - In the above figure t

DBK210, pg. 8 987594 DBK Option Cards and Modules 5. Set S1 micro-switches to agree with the actual settings of the switches on the DBK210

Pagina 10 - DBK210 – Specifications

DaqView’s Channel Setup Tab In the above figure the 4 Banks for one DBK210 card are listed in the CH column as: P2 0-A, P2 0-B, P2 0-C, and P2 0-D.D

Commenti su questo manuale

Nessun commento