Measurement-computing LogBook Series Manuale Utente Scaricare il pdf (Pagina 141)

Software Reference 989592 LogView LV-15

Selecting Input Range for Channel P1-CH02

4. Click the Digital <Input> button. Turn all the digital channels “Off”—or “On” as applicable.

5. Click the <Acq> (Acquisition Configuration) button or select that submenu from

the View pull-down menu, and the Acquisition Configuration window will appear.

6. From the Acquisition Configuration window, select all the parameters that define

your desired acquisition. Under the Trigger tab, select Immediate as the trigger if

you want to start the acquisition the moment the system is armed. Under the Post Trigger tab, select

a duration

of 1 minute. In the Scan Rate frame, set Base Rate A to 5 Hz (or as applicable) by typing in a value

and selecting the proper unit.

Acquisition Configuration Window

7. After verifying that all settings are as you desire, select Save under the File menu and associate

a name to your acquisition setup file (if not already done so).

8. From the main toolbar, click the <Download> button to send the setup file to

LogBook’s PC-Card.

9. To arm an attached LogBook, click the Arm (f) button.

10. To arm a remote LogBook, eject the PC-Card, transport it to LogBook, insert

it into LogBook's socket, and then apply power.

11. To upload data from an attached LogBook during or after an acquisition, click the

<Upload> button.

12. To upload data from a remote LogBook after the acquisition is complete, or as part of card

swapping, eject the PC-Card from LogBook and transport to the PC’s socket; then click

the <Upload> button.

13. To inspect the data, click the <View Data> button. This will activate a “view” program, if

installed.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 221 222

Nessun commento

Measurement-computing LogBook Series Manuale Utente Pagina 141