Measurement-computing PCI-DUAL-AC5 Manuale Utente Scaricare il pdf (Pagina 10)

PCI-DUAL-AC5 User's Guide Installing the PCI-DUAL-AC5

Connecting the board for I/O operations

Connectors, cables – main I/O connector

The table below lists board connectors, cables, and compatible accessory products for the PCI-DUAL-AC5.

Board connector, cables, and accessory equipment

Connector type

100-pin high-density Robinson-Nugent

Compatible cables

 C100FE-x

 C100FF-x

Compatible accessory product with the C100FE-x cable

SSR-PB24 (two required)

Compatible accessory products with the C100FF-x cable

 CIO-MINI50 (two required)

 CIO-SPADE50 (two required)

 CIO-TERM100

 SCB-50

The PCI-DUAL-AC5 connector is accessible through the PCI slot expansion bracket. The connector is a

standard 100-pin header connector. If you are connecting to the SSR-PB24 or equivalent, we recommend using

the C100FE-x series cable, which splits the 100-pins into two edge-connectors which you can then connect to

two SSR-PB24 racks.

If you need direct access to the digital I/O, use the C100FF-x cable to connect two CIO-MINI50s, an SCB-50

or a CIO-TERM100. These combinations bring all I/O connections out to the screw terminals.

Pinout – main I/O connector

The I/O connector for the board is a 100-pin header connector accessible from the rear of the PC through the

expansion backplate. See Figure 1 for pin assignments.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Nessun commento

Measurement-computing PCI-DUAL-AC5 Manuale Utente Pagina 10