Measurement-computing 200 Series DaqBook Manuale Utente Scaricare il pdf (Pagina 32)

3-14 DaqBook Hardware

01-23-02

DaqBook User’s Manual

4 – Remove termination panels

Remove the two screws mounting each termination panel to the card drawer.

P1 Interconnect Board

DaqBook/200 sits

on a shelf above

the card drawer

Card Drawer to Chassis Connector

Termination Panel

(1 of 3)

JP1 Jumper

Step 6B

JP2 Jumper

Step 6A

Standoff

(2 per card)

Card Drawer

DBK Card to

Interconnect Board

Steps 7A and 10A

Top C over

()

cut-away view

Internal DB37 connects

to DBK cards. (1 of 3)

DaqBook/260 Hardware Setup

Thumbscrew

(1 of 3)

Steps 3B and 13C

Termination Panel to

Card Drawer Screws

Steps 4 and 12

DBK Card to

Card Drawer Screws

Steps 7B and 10B

Card Drawer to

Chassis Screw

(1 of 2)

Steps 3A and 13D

Card Drawer to

Chassis Screw

(1 of 2)

Steps 3A and 13D

Top Cover Screws

Steps 2 and 15

5 – Determine power requirements

Depending on the power needs of your system’s DBK cards, you may need to add a power card.

Reference Note:

Both the

DBK Basics

section of this manual and the

Power Management

section of the

DBK Option Cards and

Modules User’s Manual

(p/n 457-0905) contain power-related information. As a part of product support, the

DBK manual is automatically loaded onto your hard drive during software installation. The default location is the

Programs directory, which can be accessed through the Windows Desktop.

Use the

DBK Power Requirements Worktable

to calculate the power requirements of your system’s DBK

cards.

B. Use the

Available Power Chart

to determine your system’s power availability.

If the required power in step 5A is more than the available power in step 5B, you need an additional power

card. There are two auxiliary power supply cards:

•

DBK32A – For use with a LogBook, DaqBook, or DaqBoard. It supplies ±15 V.

•

DBK33 – For use with a Log Book, DaqBook, DaqBoard, or Daq PC-Card. It supplies +5 V and ±15 V.

Reference Note:

Refer to the

DBK Option Cards and Modules User’s Manual

(p/n 457-0905) as needed. As a part of product

support, the DBK manual is automatically loaded onto your hard drive during software installation. The default

location is the Programs directory, which can be accessed through the Windows Desktop.

DaqBook/260 Hardware Setup

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 53 54

Commenti su questo manuale

Nessun commento

Measurement-computing 200 Series DaqBook Manuale Utente Pagina 32

Commenti su questo manuale

Prodotti e manuali riguardandi Hardware Measurement-computing 200 Series DaqBook