Measurement-computing DBK207 Manuale Utente

Navigare online o scaricare Manuale Utente per Hardware Measurement-computing DBK207. Measurement Computing DBK207 User Manual Manuale Utente

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 8
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 0
DBK207 and DBK207/CJC 5B Carrier Boards
For 5B-Compatible Analog Input Modules
Overview …… 1
Warnings, Cautions, and Tips ……. 3
Power Considerations …… 4
External Ground Connection …… 4
Channel Configuration …… 5
5B Module Connection …… 5
Terminal Block Connection …… 6
Connecting DBK207 or DBK207/CJC to a Daq Device …… 7
Software Setup …… 7
DBK207 and DBK207/CJC – Specifications …… 8
Note:
The DBK207 and DBK207/CJC each provide: (a) two P1 connectors, (b) footprints for sixteen 5B
Modules, (c) 16 terminal blocks. In addition, DBK207/CJC provides Cold Junction Compensation.
The DBK207 and DBK207/CJC each include a 100-pin P4 connector for use with DaqBoard/2000
Series and cPCI DaqBoard/2000c Series Boards, and DaqBook/2000 Series devices.
This product is not used for LogBook applications.
Reference Notes:
In regard to calculating system power requirements refer to the DBK Basics section.
For information regarding a related product with a different form-factor, refer to the
DBK44, 2-Channel 5B Signal-Conditioning Card section of this manual.
Chapter 2 includes pinouts for P1, P2, P3, and P4. Refer to pinouts applicable to your
system, as needed.
For a quick comparison of all DBK200 Series boards, refer to the DBK200 Series Matrix.
The matrix is located just before the DBK200 section.
Refer to the DaqBoard/2000 Series and cPCI DaqBoard/2000c Series User’s Manual
(p/n 1033-0901) or the DaqBook/2000 Series User’s Manual (p/n 1103-0901) for information
pertaining to those products, as needed.
Overview
The DaqBoard/2000 Series and cPCI DaqBoard/2000c Series boards communicate [external from the host
PC] through a 100-pin P4 connector. The P1, P2, and P3 connectors discussed in association with
DaqBoard/2000 Series and cPCI DaqBoard/2000c Series boards are subset connectors of the 100-pin P4
connector that is located on those boards. Chapter System Connections and Pinouts, includes pinouts for
P1, P2, P3, and P4.
DBK207/CJC Carrier Board for 5B Compatible Modules
DBK Option Cards and Modules 987594 DBK207 and DBK207/CJC, pg. 1
Vedere la pagina 0
1 2 3 4 5 6 7 8

Sommario

Pagina 1 - Overview

DBK207 and DBK207/CJC 5B Carrier Boards For 5B-Compatible Analog Input Modules Overview …… 1 Warnings, Cautions, and T

Pagina 2 - WARNING

DBK207 and DBK207/CJC, pg. 2 987594 DBK Option Cards and Modules WARNING Ensure that hard-wire emergency over-ride circuitry exists for al

Pagina 3 - Warnings, Cautions, and Tips

Warnings, Cautions, and Tips WARNING Ensure that hard-wire emergency over-ride circuitry exists for all applications that make use of dangerous switc

Pagina 4 - External Ground Connection

DBK207 and DBK207/CJC, pg. 4 987594 DBK Option Cards and Modules Power The DBK207 and DBK207/CJC require +5 VDC from a regulated DC power su

Pagina 5 - 5B Module Connection

Channel Configuration Up to 16 DBK207 [DBK207/CJC] boards can be connected to a Daq-based acquisition system. Since this is a daisy-chain interface,

Pagina 6 - Terminal Block Connection

DBK207 and DBK207/CJC, pg. 6 987594 DBK Option Cards and Modules Terminal Block Connection WARNING Shock Hazard. De-energize circuits c

Pagina 7 - Software Setup

Connecting DBK207 or DBK207/CJC to a Daq Device DBK207 and DBK207/CJC can be connected to the P4 connector of a DaqBook/2000 Series device or a DaqBo

Pagina 8

DBK207 and DBK207/CJC, pg. 8 987594 DBK Option Cards and Modules DBK207 and DBK207/CJC – Specifications Name/Function: DBK207 – Carrier

Modelli collegati DBK207/CJC

Commenti su questo manuale

Nessun commento