Measurement-computing Digital488/80A Manuale Utente Scaricare il pdf (Pagina 81)

Y - Bus Terminator

SYNTAX

Yn Define mode n of IEEE 488 bus terminator, where n = 0, 1, 2, or 3.

Y0 (Default) Define carriage-return line-feed (CR LF).

Y1 Define line-feed carriage-return (LF CR).

Y2 Define carriage return (CR) only.

Y3 Define line feed (LF) only.

Y? Returns current bus terminator mode n.

Note:

To save a bus terminator as the new default setting, use the Save Configuration (

command

S0.

DESCRIPTION

At power-up, the IEEE 488 bus terminator defaults to the Bus Terminator (

Y) setting saved in configuration 0 (the

power-up configuration). It may also be programmed for any combination of carriage return (

CR) and line feed (LF).

Mode Y0 is the most commonly-accepted terminator (CR LF). Mode Y1 reverses the sequence (LF CR). Mode Y2

sends carriage return (

CR) only, while mode Y3 sends line feed (LF) only. To save a bus terminator as the new

default setting, use the Save Configuration (S) command S0.

EXAMPLE

PRINT#1,"OUTPUT08;Y3X"

Line 1: Select the line feed terminator.

Digital488/80A User’s Manual

967695 Digital488/80A Commands 75

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 105 106

Nessun commento

Measurement-computing Digital488/80A Manuale Utente Pagina 81