Measurement-computing DaqBook 2000 Series Manuale Utente Scaricare il pdf (Pagina 25)

DaqBook/2000 Series and DaqOEM/2000 Series 898095 Device Overviews 2-9

DaqBook/2020’s on-board scan sequencer lets you select up to 16384 channel/range combinations. The

sequencer scans all channels of the scan at 5µs/channel, 10µs/channel, or 1000µs/channel.

100M-bit Ethernet allows analog and digital/counter input dat

a, as well as analog and digital output data, to

flow between the PC and the DaqBook/2020.

DaqBook/2020 supports a full complement of trigger modes including:

• Hardw

are analog triggering – A user-programmed trigger level sets an analog DAC, which is

compared in hardware to the analog input level on the selected channel. Trigger latency is < 5 µs.

• Digital and pattern triggering – DaqB

ook/2020 includes a digital trigger input line, which

allows TTL-level triggering and latencies less than 5 µs. The trigger can be programmed for logic

level or edge triggering. In pattern triggering, any of the digital input ports acts as the trigger port.

You can program the digital pattern.

• Software-based triggering – The PC

detects the trigger event from analog, digital, or counter

readings. Six pre- and post-triggering modes are supported.

The four 16-bit, 100-kHz analog output channels have an output from -10 V to +10 V.

Other features of the DaqBook/2020 include:

• 2

4 TTL-level digital I/O lines. They are divided into three 8-bit digital I/O ports (on P2).

• Four 16-bit counters. Each can accept frequency inputs up to 10 MHz. The counters can be

cascaded i

nto two 32-bit counters.

• Two 16-bit timer outputs. Each can generat

e square waves from 16 Hz to 1 MHz.

• Configuration through software. There are no swi

tches or jumpers on the DaqBook/2020.

• 16 differential voltage inputs vi

a BNC connectors.

• 14 thermocouple inputs vi

a mini-TC connectors.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 89 90

Nessun commento

Measurement-computing DaqBook 2000 Series Manuale Utente Pagina 25